Bulutfon

Preset for the Bulutfon cloud PBX. The PBX address is specific to your company.

Values are taken one-to-one from the product’s telephony preset (sip_presets.py). Check any field marked Not verified in the docs in your provider’s panel; it stays editable in the console with the same note.

Provider key

bulutfon_sip

Region

Türkiye (national numbers)

Connection test

SIP REGISTER

Username

Extension number (e.g. 1001)

Caller ID (DID)

Caller number (DID), e.g. 0850 123 45 67

Preset values

These values are pre-filled in the console; you can change every one of them.

Field	Default	Status
SIP server	enter your own — domain or IP, optional :port	! Not verified in the docs
Transport	UDP	! Not verified in the docs
Authentication	username / password (Digest)	! Not verified in the docs
Dialled number format	national	! Not verified in the docs
Inbound signalling IPs	— (none published)	! Not verified in the docs
Suggested codecs	PCMA, PCMU	! Not verified in the docs
SIP REFER (transfer)	unknown — use bridge	! Not verified in the docs

Provider notes

Your Bulutfon PBX address is specific to your company: <your-pbx-name>.bulutfon.net. The username is the extension number and the password is the extension password (PBX → Extensions). Port, transport and codec aren't documented.

Sources

• github.com/bulutfon/documents

Connecting

1. In Settings → Integrations → Phone line, pick Bulutfon as the provider. The preset fills in the fields.
2. Enter the SIP username, password (write-only) and caller number (DID); change the server, transport or number format if needed.
3. Press Test connection. Then map your inbound numbers to an assistant. Number mapping →